NEWMOA - P2Rx™ Topic Hubs™
 
Pollution
Prevention
Mercury IMERC Solid
Waste
Hazardous
Waste
Waste Site
Cleanup
ERP About
NEWMOA
 
About Links Publications Workgroups
NEWMOA Logo
site map    member login
Pollution Prevention & Sustainability P2Rx Info Resources Topic Hubs
 
 
Archived: P2Rx no longer updates the narrative information, however the links are maintained.

Browse by Keyword

Wood Furniture Manufacturing: Browse by Keyword
Table of Contents
Background and Overview
Operations
Reasons for Change
P2 Opportunities
Assistance Activities
Where To Go for Help
Complete List of Links

Keywords:
Best management practices / Clean Air Act / Coating processes / Coatings / Dust control / Economic analysis / Employee safety / Furniture industry and trade / Health effects / High volume low pressure spray guns / Maintenance / Materials handling / Paint / Recovery equipment / Recycled products / Solvent waste / Solvents / Spray guns / Ultraviolet curing / Volatile organic compounds / Waste reduction / Water based products / Wood waste


Alphabetical Listing of Reference Documents by Title
NOTE: [PDF] links require Acrobat Reader from Adobe.

Economic Analysis: Converting from Petroleum-Based to Ultraviolet-Light Cured Coating System for Medium-Size Wood Products Manufacturers [PDF]
Abstract: Describes the results of a study conducted to evaluate the feasibility of a manufacturer of wood doors and window trim converting from the conventional, petroleum-based coating process to a method by which lacquer cures when exposed to ultraviolet light.
Source: Pacific Northwest Pollution Prevention Research Center (PPRC)
URL: http://infohouse.p2ric.org/ref/03/02122.pdf

Geiger Brickel Benefits: Case Study [PDF]
Abstract: Describes how office furniture producer Geiger Brickel incorporates UV-curable and waterborne coatings in two of its plants.
Source: FDM Finishing Forum
URL: http://infohouse.p2ric.org/ref/07/06607.pdf

Wood Finishing: Reducing Waste and Cost Saving Ideas
Abstract: This online fact sheet includes general information on emissions and waste issues usually associated with the wood products industry, the benefits of reducing waste, the current standard wood finishing process, alternative coatings options, alternative spray equipment, and other waste reduction options for wood finishers.
Source: Minnesota Technical Assistance Program, University of Minnesota
URL: http://www.mntap.umn.edu/PAINT/39-Wood.htm

 


The Topic Hub™ is a product of the Pollution Prevention Resource Exchange (P2Rx)

The Wood Furniture Manufacturing Topic Hub™ was developed by:

Northeast Waste Management Officials' Association
Northeast Waste Management Officials' Association
Contact email: abray@newmoa.org

Hub Last Updated: 1/8/2013

 

 

Last Modified 10/04/2011

Home  |  Pollution Prevention  |  Mercury  |  IMERC  |  Solid Waste
Hazardous Waste  |  Waste Site Cleanup  |  About NEWMOA  |  NEWMOA Members

Copyright 2014 NEWMOA, Northeast Waste Management Officials' Association
129 Portland Street, Suite 602; Boston, MA 02114-2014;
ph (617) 367-8558 | TTY (800) 439-2370
All Rights Reserved
Comments contact: .